Edifier TWS1 Pro

RM269.00 – RM299.00

Stable and reliable Bluetooth 5.2
aptX adaptive, aptX, SBC
Total up to 42 Hours Battery Life
40 minute fast charge
IP65 Dust and Waterproof
Qualcomm CVC 8.0 noise reduction mic
True Wireless Mirroring fast switching

Also Available here

Color Option

Clear selection

Specifications	Edifier TWS1 Pro Earbud
Bluetooth Version	Bluetooth 5.2
Bluetooth Profile	A2DP, BLE, AVRCP, HFP, HSP
Audio Decoding	aptX Adaptive, aptX, SBC
Effective Distance	10M
Play Time	Earbuds: 12Hrs, Case: 30Hrs
Charging Time	Earbuds: 1.5 Hrs, Case: 2 Hrs
Input	5V==60mA (earbuds), 5V==1.5A (Case)
Frequency Response	20Hz-20KHz
Output Pressure Level	95± 3dBSPL (A)
Impedance	16Ω
Product Dimension	Earbuds: 18mm(W) x 25mm(H) x 18mm(D) Case: 60mm(W) x 40mm(H) x 25mm(D)
Similar Product	TWS1
Also Available here

Edifier TWS1 Pro Earbud FAQ

Q: How do I check the Battery Level?

A: When you open the charging case lid, the charging case LED will blink, Blink 3 time = 70%-100%, 2 times = 30%-70%, 1 time = less than 30%. You can check the earbud battery in the notification area after connected to your phone.

Q: How Do I connect the earbud to my device?

A: Your earphone need to enter pairing mode in order to pair with your devices:
1. Take out the earbud from the charging case. The earbud LED should blink in red and blue alternatively.
2. If it doesn’t Blink in red and blue then you can press and hold the touch panel of either one of the earbud and it will blink in red and blue alternatively.
3. Search again for Bluetooth device in your device.It id doesn’t appear then you can try turn off and turn on the Bluetooth in your device settings.
4. Click on the the earbud in the available Bluetooth device to pair. once paired it will auto connect the next time when you take it out unless your unpair it.

Q: How to Factory reset?

A: Unpair your earphones. Take out Left earbuds only, Hold the touch panel for 8 seconds. It will blink red/blue first then blink 6 times in blue. Repeat the same to the other side.

Q: My earbud only can connect one side at a time. Can't connect both.

A: This may caused by the earphones are not TWS-Paired(Left-Right Pair) to each other. Please try TWS-Pair the earphones:
1. Unpair your earphones
2. Put both earbuds in the charging case
3. Tap five times on both earbuds. and it will blink in blue rapidly
4. After a while both earbuds will goes back to normal. You can pair again with your phone

Q: My TWS1 Pro earbud keep blinking blue rapidly and can't connect to my phone.

A: Your earbud has entered TWS-Pairing mode (L-R Pair). To fix this:
1. Unpair your earphones
2. Put both earbuds in the charging case
3. Tap five times on the earbuds that doesn’t blink. and it will blink in blue rapidly as well
4. After a while both earbuds will goes back to normal. You can pair again with your phone

Weight	0.5 kg
Dimensions	15 × 15 × 5 cm
Color Option	Grey, Pink, White

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Featured Brands

By Category

Edifier TWS1 Pro

Edifier TWS1 Pro Earbud FAQ

Reviews

Featured Brands

By Category

Edifier TWS1 Pro

Edifier TWS1 Pro Earbud FAQ

Reviews

Related products

Edifier GT4

Edifier GT4

Edifier GM260 Plus

Edifier GM260 Plus

Edifier W240TN

Edifier W240TN

Edifier GX07

Edifier GX07