SRM-T8000

RM24,499.00

  • Low-noise, well-established 6922 dual triode tube adopted for high sound quality
  • Balanced inputs realizing true tone quality of balanced transmission.
  • Coupling capacitor-free configuration from input to output.
  • Compatible with all STAX PRO-bias earspeakers with 5-pin plug
  • Various high-grade electronic parts

Available on backorder

STAX SRM-T8000

STAX SRM-T8000

STAX SRM-T8000

SRM-T8000 is Stax’s latest flagship electrostatic headphone amplifier utilizing hybrid technology. It employs two 6922 in the input stage, driving a Class-A solid-state output stage. The vacuum tubes isolated in a separate section made of a vibration-proof damper and shield cover to eliminate vibration and noise. The high-capacity large toroidal transformers and selected high-quality parts allow the highest refinement in sound.
STAX SRM-T8000

6922 dual triode tube

The noise level is extremely low and, by just that much, the particle of low-level sound usually buried in noise comes up to the surface. Then even the usual level sound clears up to improve sound quality such as transparency. It seems as if the glass which superficially looks transparent has been cleaned anew. The whole circuit forms a hybrid one using class-A semiconductor output stage with large current emitter follower. The result is very low noise, live and smooth musical sound as well as excellent spatial description. The vacuum tube of the first stage is mounted on an independent board in order to eliminate vibration and external noise. Further, noises have been excluded thoroughly by vibration-proof damper and vacuum tube shield cover used also for a hard disk etc.
STAX SRM-T8000

Rear Panel

Four pairs of inputs are equipped. (Notes: LINE4 is an optional circuit board slot for future purpose. As for now, release is not yet determined.). LINE1, LINE2 or LINE3 inputs of the SRM-T8000 can bypass the incorporated volume controller, enabling it to connect to source equipments with volume controller or to an external attenuator. That is, the unit can be used as an exclusive power amplifier with no volume controller. Balanced inputs realizing true tone quality of balanced transmission.
STAX SRM-T8000

Aluminum Chassis

The newly developed large-sized aluminum insulator combined with new vibration-proof material and high frictional coefficient (grip power) has been employed. The friction power is so high that you almost need not hold the unit when inserting the plug of your earspeaker.
SpecificationsSTAX SRM-T8000
Frequency response1Hz – 115kHz / when used with one earspeaker
Gain60dB (x1000)
Harmonic distortion0.01% /1kHz
Input terminalLINE1/LINE2 (RCA), LINE3 (XLR), LINE4 (optional input for future)
Rated input level100mV (at 100V output)
Input impedance50kΩ (RCA) / 50kΩx 2 (XLR)
Maximum output voltage470Vrms (1330V p-p)
Mains voltageAC120V/AC220/AC230/AC240, 50/60Hz (depending on your country’s voltage)
Power consumption95W
Operating temperature0 to 35 degrees C (less than 90% humidity, non condensing)
Dimension320 (W) x103 (H) x395 (D) mm (protruding portion included)
Weight7.3kg
Similar ProductSRM-700S
Sourcestax-international.com
Weight 8 kg
Dimensions 25 × 25 × 25 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.