edifier x3s true wireless stereo bluetooth earbuds
| Specifications | Edifier X3S |
|---|
| Bluetooth Version | Bluetooth V5.2 |
| Audio Codecs | aptX, SBC |
| Driver Unit | 6mm dynamic driver |
| Playback Time | About 1Hr(earbud + 20Hrs(Case) |
| Charging Time | About 1Hr 40min (earbud) / 2Hrs (Case) |
| Battery Capacity | 50mAh (earbud) / 350mAh (Case) |
| Frequency Response | 20Hz-20KHz |
| Sound Pressure Level | 94±3dBSPL(A) |
| Impedance | 16Ω |
| Charging Port | USB Type-C |
| IP Rating | IP55 |
| Net Weight | 62g Total |
| Edifier Apps Support | No |
| Game Mode | Yes |
| Control | Touch Control: Play/Pause/Prev/Next/Pickup/End Call/Volume Control |
| Earbud Design | In-Ear with Silicon Eartip |
| Pairing method | Pair via Earbud |
| Accessories | 3 Pair Eartips, USB Type C Charging Cable |
| Similar Product | X3 Plus |
| Also Available Here |   |
Edifier X3S True Wireless Earbud FAQ
Q: How do I pair the earbuds to my device?
A: Your Earbud need to enter pairing mode in order to pair with your device:
1. Take out one earbud and hold the touch area until it blink red and blue.
2. Search in your phone/device bluetooth discovery.
3. Click on the X3S earbud to pair.
4. Once paired it will auto connect when the earbud is present.
* You only need to pair 1 side. The other side will have sound also.
Q: Do I need to charge it when first use?
A: Yes. You can let it charge for 3 hours when first use to warm up the battery.
Q: My left and right side volume is not balanced.
A: Issue may caused by dirt blocking the filter. Try remove the silicon eartip and clean the filter using cotton bud.
Q: My earbud still connect to my phone after I put it back to the case.
A: Please make sure the earbud led turn red when put back in the case. If it doesn’t, you cna try clean the charging connectors using cotton bud. May have some dirt blocking the connector and prevent it from charging.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.