Description
Edifier MP100 Portable Speaker
| Specifications |
Edifier MP100 Portable speaker |
| Bluetooth Version |
Bluetooth v4.0 |
| Total Power Output |
4.5W |
| Input Sensitivity |
600 ± 50mFFS |
| Dimension |
87x87x40mm |
| Weight |
0.21Kg |
| Signal-To-Noise Ratio |
≥ 80dBA |
| Frequency Response |
160Hz – 14KHz |
| Power Supply |
USB Drive, Battery: 1500mAh, 3.7V |
| Packing Dimension |
154x154x209mm |
| Similar Product |
MP200 |
| Also Available Here |
 |
Edifier MP100 Portable Speakers FAQ
Q: My speakers doesn't produce any sound.
A: 1. Check if the speakers is turned on
2. Try to turn up the volume using the volume control.
3. Ensure the audio cables are firmly connected and the input is set correctly on the speakers.
4. Check if there is a signal output from the audio source.
Q: I can't connect to Bluetooth.
A: 1. Make sure the speaker is switched to Bluetooth input. If it is in other audio input modes, Bluetooth will not connect.
2. Check if it is connected to other devices. if it does try to unpair it or turn off the device bluetooth to disconnect it.
3. Effective Bluetooth transmission range is 10 meters; Please ensure that operation is within that range.
4. Try connect to another Bluetooth device and see if it works.
Q: I hear noise coming from the speaker.
A: Edifier Speakers generate little noise, while the background noise of some audio devices are too high. Please unplug audio cable and turn the volume up, if no sound can be heard at 1 meter away from the speaker, then there is no problem with this product.
some noises may be generated by the music file due to compression. Please test with high quality music file to ensure the best quality from the speaker.
Q: Is this Speaker waterproof?
A: This speaker is IP54 Waterproof and dust proof rating. It can sustain a splash but it is not recommended to submerge it into deep water.
Inter-Asia
Edifier Malaysia