Sale!

TWS1 Pro

RM398.00 RM199.00

  • Stable and reliable Bluetooth 5.2
  • aptX adaptive, aptX, SBC
  • Total up to 42 Hours Battery Life
  • 40 minute fast charge
  • IP65 Dust and Waterproof
  • Qualcomm CVC 8.0 noise reduction mic
  • True Wireless Mirroring fast switching
Color Option

Clear selection
SKU: N/A Categories: , Tags: , ,

Description

Edifier TWS1 Pro Earbud

Edifier TWS1 Pro Earbud Edifier TWS1 Pro Earbud Edifier TWS1 Pro Earbud Edifier TWS1 Pro Earbud Edifier TWS1 Pro Earbud Edifier TWS1 Pro Earbud Edifier TWS1 Pro Earbud Edifier TWS1 Pro Earbud
Specifications Edifier TWS1 Pro Earbud
Bluetooth Version Bluetooth 5.2
Bluetooth Profile A2DP, BLE, AVRCP, HFP, HSP
Audio Decoding aptX Adaptive, aptX, SBC
Effective Distance 10M
Play Time Earbuds: 12Hrs, Case: 30Hrs
Charging Time Earbuds: 1.5 Hrs, Case: 2 Hrs
Input 5V==60mA (earbuds), 5V==1.5A (Case)
Frequency Response 20Hz-20KHz
Output Pressure Level 95± 3dBSPL (A)
Impedance 16Ω
Product Dimension Earbuds: 18mm(W) x 25mm(H) x 18mm(D) Case: 60mm(W) x 40mm(H) x 25mm(D)
Similar Product TWS1
Also Available here lazada shopee
Inter-Asia

Edifier TWS1 Pro Earbud FAQ

Q: How do I check the Battery Level?
A: When you open the charging case lid, the charging case LED will blink, Blink 3 time = 70%-100%, 2 times = 30%-70%, 1 time = less than 30%. You can check the earbud battery in the notification area after connected to your phone.
Q: How Do I connect the earbud to my device?
A: Your earphone need to enter pairing mode in order to pair with your devices:
1. Take out the earbud from the charging case. The earbud LED should blink in red and blue alternatively.
2. If it doesn’t Blink in red and blue then you can press and hold the touch panel of either one of the earbud and it will blink in red and blue alternatively.
3. Search again for Bluetooth device in your device.It id doesn’t appear then you can try turn off and turn on the Bluetooth in your device settings.
4. Click on the the earbud in the available Bluetooth device to pair. once paired it will auto connect the next time when you take it out unless your unpair it.
Q: How to Factory reset?
A: Unpair your earphones. Take out Left earbuds only, Hold the touch panel for 8 seconds. It will blink red/blue first then blink 6 times in blue. Repeat the same to the other side.
Q: My earbud only can connect one side at a time. Can't connect both.
A: This may caused by the earphones are not TWS-Paired(Left-Right Pair) to each other. Please try TWS-Pair the earphones:
1. Unpair your earphones
2. Put both earbuds in the charging case
3. Tap five times on both earbuds. and it will blink in blue rapidly
4. After a while both earbuds will goes back to normal. You can pair again with your phone
Q: My TWS1 Pro earbud keep blinking blue rapidly and can't connect to my phone.
A: Your earbud has entered TWS-Pairing mode (L-R Pair). To fix this:
1. Unpair your earphones
2. Put both earbuds in the charging case
3. Tap five times on the earbuds that doesn’t blink. and it will blink in blue rapidly as well
4. After a while both earbuds will goes back to normal. You can pair again with your phone

Additional information

Weight N/A
Dimensions N/A
Color Option

,

0