RM179.00 RM149.00

  • The touch control is easy to use to the users and can be used to activate voice assistant
  • 6 + 18 Hours Playback time
  • The Bluetooth V5.0 keeps a stable and faster signal transmission
  • The IP55 Dust and Water Resistant earbuds prevent rain and sweat ideal for any outdoor activity
  • The AptX audio decoding provides rich detail of sound and CD-quality sound performance to the users
  • Type-C charging port
Color Option

Clear selection


X3 x3
Bluetooth VersionBluetooth V5.0
Bluetooth ProfilesA2DP, AVRCP, HFP, HSP
Audio DecodingQualcomm aptX, SBC
Decoding Rateup to 352kbps
Audio Frequency16bit/44.1kHz
Effective Distance30ft/10m
Playback Time6Hrs(earbuds) + 18Hrs(Charging Case)
Charging TimeApprox. 1.5Hrs
InputDC5V 50mA(earbuds)
DC5V 350mA(Charging Case)
Frequency Response20Hz-20KHz
Charging PortUSB Type C
MeasurementCharging Case: 50(W) x 40(H) x20(L)mm
Earbud: 18(W) x 16(H) x30(L)mm
Packaging Box: 150(W) x 105(H) x38(L)mm
Similar ProductX3
Also Available Herelazada

Edifier X3 FAQ

How To Check Edifier X3 Battery Level
There is no Battery level indicator on the charging case. When you plug in for charging the Case LED will lit up. It will turn off when it is full; You can check your earbuds battery level after connected to smart phone.
How to Factory reset?
Unpair your earphones. Take out Left earbuds only, Hold the touch panel for 8 seconds. It will blink red/blue first then blink 6 times in blue. Repeat the same to the other side.
Edifier only one side can connect at a time
This may caused by the earphones are not TWS-Paired(Left-Right Pair) to each other. Please try TWS-Pair the earphones:
For TWS1, TWS2, TWS5, X3:
1. Unpair the earphones
2. Take out the right side only and double tap, blue led will blink fast
3. Take out the left side and do the same
4. Put both earbud near each other, after a while blue led will blink twice every 5 second after successful synced
5. try pair again to your phone

Additional information

Weight 0.5 kg
Dimensions 10 × 10 × 4 cm
Color Option